ATW7S3
|
|
Camera |
Receiver (Monitor) |
| Frequency |
2.4-2.4835 GHz |
|
| Transmitting Range |
30m |
|
| Channel |
1 Channel |
3/4 Channel |
| IR LED |
12 |
N/A |
| Video Format |
NTSC/PAL |
|
| H Resolution |
380 Horizontal TV Lines |
N/A |
| Operation Temp |
14-122 °F / -10~50 °C |
|
| Speaker Output |
N/A |
8 ohm / 0.5W |
| Power Consumption |
330mA |
1600mA |
| Power Supply |
12V/24V DC |
7V DC |
| Output Power |
CE<10mW / FCC<1mW |
N/A |
| Size (mm) |
78 x 80 x 66mm |
184 x 52.7 x 127mm |
| Weight |
260g |
680g |
| Approval |
CE / R & TTE / FCC / E-Mark / IP44 Certi,C-Tick |
|
ATW1 Camera
| Lens |
Board Lens F2.1mm / F1.2 |
| Image Sensor |
1/4'' Color Sharp CCD Sensor |
| Pixel |
510x492 (NTSC) or 628x562 (PAL) |
| Resolution |
380 Lines |
| Illumination |
0 Lux |
| E Shutter Speed |
1/50 - 1/100,5000 second |
|
S/N Ratio |
>48 db |
Parts for wireless System
Yes it is certified for use in Australia
Warehouse front end loader problem -
Operator of front end loader could not see the conveyer belt because of the mountain of rubbish. A secondary requirement was to allow the operator to do other work with front end loader, within the warehouse, but still monitor the material on the conveyer belt. Operating distance was +150 meters.
The solution was to mount the wireless camera above conveyer belt and install wireless monitor in the cabin of front end loader.
Copyright © 2000-2004 SB at Astral Electronics Pty Ltd. ABN 68100584218 Last modified 21/04/2006